OPERATION OF THE HVAC SYSTEM

How to change from cooling to heat mode? (2 minutes)

These days, like every autumn, it's time to take the blankets out the closet, to find an umbrella with no broken ribs or stretchers, to adjust your clock’s time, to check the medicine cabinet for common cold relieve medication... and if you happen to live in Madroños 27, then you are an user of the HVAC Solutions installed by Zetus there, so you may already be wondering how to switch the system from cooling to heating mode. Well, here you have step by step instructions to get it done...
and the best part is, the instructions are accompanied by the video above, demonstrating the entire procedure in two minutes.
It is really easy!

  1. Access the Control Panel
  2. Enter the “Favoritos” screen (star icon)
  3. Checking the current status:
    1. “On / Off Todo” >> It indicates the status of the heating: In the example of the video it is off (indicated with a 0).
    2. “Ta Consigna Todo” >> It indicates the current temperature setting, in the example of the video: 20 degrees.
    3. “Frio/Calor Todo”>> It indicates the current mode, —The system in the example of the video currently set in Cooling mode (snowflake icon)—.
  4. Switching to heat production mode:
    1. To turn on the heating, press "On / Off Todo".
    2. Select "On" in the pop-up window. (The state changes to 1).
    3. To set the desired temperature, press " Ta Consigna Todo".
    4. Enter the desired temperature in the pop-up widow: In the example of the video 24 degrees.
    5. Press the "check mark" symbol (✓) to confirm and exit: In the example of the video, the indicated temperature changes to 24 degrees.
    6. Press " Frio/Calor Todo " to switch to heating, selecting the "Calor" in the pop-up window. (The symbol changes to a heating icon).
  5. Final Check:
    1. Press the "return" icon (the arrow in the lower left corner), to return to the control panel.
    2. Select "Clima" (pressing the thermometer icon) and then option "Estancias" (Rooms).
    3. Press the symbol of each room (kitchen, living room, bedrooms, etc.), to check if their temperature settings have changed.
      Occasionally - as in the example of the video – you will notice that the temperature setting is has not updated.
      In such cases:
      • Press the arrow in the lower left corner of the screen to return to the Control Panel, and then return to "Favoritos" (by pressing the star icon).
      • Re-enter the desired temperature, pressing "Ta Consigna Todo" to repeat steps 4.c. to 4.e.
      • Return to the Control Panel and repeat the "Clima" check for each of the rooms "Estancias".
  6. Finally, we move to the HVAC cabinet, to check that the screen marked with "AU” indicates Heating. The green light should be on. In addition, we can check the temperature of the deposit (in the example of the video, 40 degrees).

Check the next video (1 minute) and the corresponding instructions on how to regulate the temperature of the underfloor heating.

How to regulate the temperature of the underfloor heating? (1 minute)

If you are a user of our HVAC installations in Madroños 27, and you have already switch from cooling to heating mode, or the other way around, remember to check the regulation of the temperature of the underfloor heating. For this you can follow the instructions below.
We also recommend watching the video explaining the entire procedure, step by step, in just one minute.
This operation is even easier than the previous one!

  1. Access de control panel.
  2. Select the thermometer icon found at the bottom of the screen.
  3. The rectangle labelled with “Ta Consigna SR" shows the temperature set for the underfloor heating.
    In the example of the video the temperature is currently set to 45 degrees.
    When in heating mode, we recommend setting this temperature to 40 degrees. In summer, when switching back to cooling mode, we recommend setting it to 16 degrees.
    To change this setting:
    1. a) Press “Ta Consigna SR”.
    2. b) Enter the desired temperature in the pop-up widow: In the example of the video 40 degrees.

Done! Enjoy your top-notch HVAC Installation!